Services
ASF Tech services for workshops and professionals
File service, online coding, engineer support, motorcycles, tools, training and business solutions. Each service has its own page with what we do, how we deliver it and what workshops ask before ordering.
- File service
- Online coding
- Technical support
- Motorcycles
- Tools and software
- Training
- Business and developers
01Engine performance and response
Stage 1, 2 and 3, Eco, torque, pedal, VMAX, Pop & Bang, Launch Control. The file your workshop receives ready to write.
- 01Stage 1More power and torque with standard hardware. The most requested file in the file service.→
- 02Stage 2File for cars with upgraded exhaust, intake or intercooler, tuned with log data.→
- 03Stage 3Bigger turbo, injectors, clutch: software built from scratch and tuned with the car's logs.→
- 04Engine ECU remappingGeneral ECU remapping: from back to stock to custom map-by-map adjustments.→
- 05Eco: fuel savingMore low-rev torque and less real consumption. The file for fleets, vans and trucks.→
- 06Torque delivery optimisationFlatter, more progressive torque curve: no jerks, no gaps, no wheelspin in first.→
- 07Throttle pedal calibrationMore direct or more progressive pedal response, by software and without inline boxes.→
- 08VMAX OFF: speed limiterSpeed limiter removal in the ECU for track and export use, or a fixed limit for fleets.→
- 09Pop & BangControlled exhaust explosions on lift-off, calibrated not to damage catalyst or valves.→
- 10Hardcut Limiter and diesel PopcornHard fuel cut at the limiter; on diesel, the "popcorn" effect.→
- 11Launch Control activationStanding start with fixed rpm and traction control, activated in the ECU and, on automatics, in the TCU.→
- 12FLAP OFF: exhaust valvesExhaust valve control: always open, by mode or by remote.→
02Deletes and system solutions
AdBlue, DPF, EGR, GPF, lambda, MAF, Swirl Flaps, Start & Stop, DTC, Immo. Definitive software solutions.
- 01AdBlue OFFComplete deactivation of the SCR system and the no-start countdown, with no residual codes.→
- 02Particulate filter DPF / FAP OFFRemoval of DPF management: no regenerations, no warnings, with the differential sensor and temperature adapted.→
- 03EGR OFFClosing exhaust gas recirculation by software with adapted air maps.→
- 04GPF / OPF OFFPetrol particulate filter: removal of management and warnings on direct-injection engines.→
- 05Catalyst / O2 sensor OFF and Lambda OFFDeactivation of catalyst diagnosis and rear lambda sensors on decat exhausts.→
- 06MAF OFF: air-mass meterRunning without an air-mass meter using the pressure and temperature air model.→
- 07EVAP OFF and SAP OFFFuel vapour system and secondary air: diagnosis deactivation in competition builds and swaps.→
- 08Swirl Flaps OFF and TVA OFFIntake flaps and diesel throttle valve: software deletion after removal.→
- 09Start & Stop OFFPermanent Start & Stop deactivation in the ECU, for motorsport, machinery and export.→
- 10DTC OFF: delete specific codesDeactivation of specific fault codes after hardware modifications, without hiding the rest.→
- 11Immo OFF: immobiliserImmobiliser deactivation in replacement ECUs for competition, off-road vehicles and machinery, with proof of ownership.→
- 12Emissions monitoring (readiness)OBD monitors and readiness adjusted after a modification so diagnosis stays coherent.→
03Gearboxes (TCU)
Automatic and DSG gearbox remapping: shift speed, torque limits and shift points.
04Other file services
Original software, no-start solutions, commercial, agricultural and gas vehicles.
- 01Original software (Back to Stock)Back to the factory file: from our history or from our original file database.→
- 02No-start solutionsVehicle that will not start due to electronics: ECU, immobiliser, corrupt software, modules.→
- 03Commercial and agricultural vehiclesTrucks, buses, construction and agricultural machinery: power, consumption, AdBlue/DPF diagnosis and ECU cloning.→
- 04Gas vehicles (LPG, ECO-G, Bi-Fuel)Software adaptation to LPG and CNG: mixture, advance, valve protection and gas-compatible Stage.→
05Online coding
Replaced ECUs, keys, modules, virginising, hidden features and post-repair errors, remotely.
- 01Coding of replaced ECUsNew or used ECU, TCU, ABS, cluster, BSI or module: remote coding so the car accepts it.→
- 02Key and immobiliser programmingSpare key, all keys lost and immobiliser modules, remotely with the workshop's tool.→
- 03Electronic module adaptationAdaptations after replacement or repair: throttle, EGR, gearbox, steering, ADAS, battery, injectors.→
- 04Virginising and cloning of modulesUsed units ready for another car (virginise) or an exact copy of the faulty original (clone).→
- 05Hidden feature activation (coding)Features the car has and the manufacturer did not activate: lights, comfort, display, Start & Stop, camera.→
- 06Post-repair error resolutionCodes that will not clear, modules not communicating, lost functions after changing parts: remote diagnosis.→
06Engineer technical support
Guided reading and writing, DTCs, unit recovery, multi-tool support.
- 01Guided reading and writingAn engineer with you during reading and writing, with any tool and protocol.→
- 02Fault code (DTC) interpretationWhat each code really means and what to measure before changing anything. Engineer second opinion.→
- 03Bricked unit recovery (Back to Stock)ECUs not communicating after a failed write: recovery via OBD, bench or boot.→
- 04Multi-tool supportKESS3, FLEX, AutoTuner, bFlash, CMD, Dimsport, Hexprog: we work with whichever you have.→
- 05Advanced remote connectionWe take control of the workshop's PC and tool to solve live what the phone cannot.→
07Motorcycles
More power, economy, speed limiter, Pop & Bang, Launch Control, Quickshifter.
- 01Motorcycles: more power and torqueMotorcycle ECU remapping: mixture, ignition, limiters and response, without piggyback boxes.→
- 02Motorcycles: speed limiter and economySpeed limiter removal and fuel-saving maps for daily and touring bikes.→
- 03Motorcycles: Pop & Bang and Crackle MapControlled crackles and bangs on overrun, calibrated for catalyst and valves.→
- 04Motorcycles: Launch ControlActivation or adjustment of Launch Control in the ECU, with launch rpm and wheelie control.→
- 05Motorcycles: Quickshifter and AutoblipperSoftware activation of clutchless upshifts (quickshifter) and downshifts (autoblipper).→
08Tools and software
Authorised dealer of Alientech, Magic Motorsport, AutoTuner and CarLabImmo; brands to order.
- 01Alientech KESS3 and licencesKESS3 Master and Slave, licences by family (cars, bikes, trucks, agricultural, marine), KTAG. Authorised dealer.→
- 02Magic Motorsport FLEX and MAGBenchFLEX, modules, licences, cables and MAGBench for bench and boot laboratory. Authorised dealer.→
- 03AutoTunerAgile tool with no mandatory subscription for OBD and bench. Authorised dealer.→
- 04CarLabImmo emulatorsImmobiliser, steering lock, Immo Bypass and Julie emulators for workshops and locksmiths.→
- 05Brands to order: diagnostics, laboratory, keys, softwareAutel, Bosch KTS, Launch, Topdon, Xtool, VCDS, Dimsport, bFlash, DFB, Hexprog, Autovei, Wabco, Xhorse, WinOLS, HaynesPro, Telwin.→
- 06Master or Slave guideThe most important decision before buying a remapping tool, explained without vested interest.→
- 07Professional software: WinOLS, technical data and deletesMap editing (WinOLS), technical data and diagnostics (HaynesPro, ESItronic) and automatic delete software.→
- 08Tool financing and payment methodsTools and licences in instalments through a partner finance company; transfer, card and workshop account.→
09Training
Courses by brand, by tool and technique, hybrid and electric, in person in Zaragoza.
- 01Remapping courses by brandAudi, BMW, Cupra, Ford, Land Rover, Mercedes, Peugeot, Porsche, Renault, Tesla, Toyota, Volkswagen: each brand's ECUs, protocols and maps.→
- 02Alientech KESS3 / KTAG courseFrom zero to reading and writing safely: OBD, bench, boot, licences and recovery.→
- 03Professional WinOLS course: map editingIdentify, understand and modify maps with judgement: Stage, Eco, deletes and checksums.→
- 04ECU repair and cloning courseECU electronics: diagnosis, common components, soldering, bench and boot cloning.→
- 05Hybrid and electric vehicle course (HVT)High-voltage qualification: safety, de-energising, diagnostics and electronics of electrified vehicles.→
- 06In-person chiptuning and TSL trainingIn-person days in Cuarte de Huerva: chiptuning from scratch and TSL training for workshop networks.→
10Business and developers
API for workshop software and white-label file service platform.
Contact
Can't find your case on the list?
Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.
- HoursOnline support every day 8:00–22:00 CET · Office Monday to Friday 9:00–13:30 and 15:00–19:00, Saturday 9:00–13:00
- Emailinfo@asftech.es
Last updated: