Other file services

Gas vehicles: LPG, CNG, ECO-G and Bi-Fuel

Factory gas cars (Dacia ECO-G, Renault Bi-Fuel, Fiat Natural Power, Seat/VW TGI) and LPG conversions have engine management that can be optimised: advance suited to gas, mixture, valve protection and a Stage 1 that works the same on petrol and gas.

Refuelling a car at a pumpGas vehicles (LPG, ECO-G, Bi-Fuel) · Zaragoza

Key facts

Category
File service
Format
File for workshops · in person in Zaragoza
Typical lead time
15–60 min during support hours
ECU access
OBD, bench or boot by ECU
Reversible
Yes, original kept
Support
Included · 8:00–22:00 every day
Price
Fixed quote in under an hour

01

What can be optimised on a gas car?

Gas (LPG or CNG) has a higher octane and different burn speed than petrol, so it accepts more ignition advance and a specific mixture; most factory systems use petrol maps with conservative corrections, and remapping adjusts advance and mixture to gas, recovers the typical power loss (5–10%) and improves consumption in gas mode.

A remapped Sandero ECO-G stops noticing the switch to gas. A TGI gains the power gas took from it. And a converted LPG with a BRC or Landi ECU is adjusted on both sides: the engine ECU and, if needed, the kit's. For taxi and delivery fleets on LPG, the gas saving adds to that of an Eco.

02

Can a Stage 1 be done on a gas car and what about gas-system codes?

Yes, Stage 1 on a gas car is done by coordinating petrol and gas maps so the gain is equal in both modes and the kit ECU follows the new references; codes a badly installed or discontinued kit generates in the ECU (P0170, P0300, mixture) are also removed when they cannot be corrected in the kit.

We always ask for the gas kit make and model and its version. If the kit has support, we prefer to adjust it at source. More on custom adjustments under ECU remapping.

Comparison

Optimise software for gas vs. leave factory management: which is right?

Quick answer: Factory management is conservative and leaves power and consumption on the table in gas mode; optimisation recovers lost power and adjusts consumption, with protection maps suited to each engine.

CriterionOptimised (ASF Tech)Factory
Power on gasSame as petrol−5–10%
Consumption on gasOptimisedConservative
AdvanceSuited to gasPetrol with correction
RiskControlled with protectionsNone

For taxis and LPG fleets, it shows every day. For a private customer, in recovering the lost power.

FAQ

Frequently asked questions

Does it work on Dacia ECO-G?

Yes, the most common case: advance and mixture adjustment on gas and coherent Stage 1.

And on converted LPG?

Yes, with the kit identified; we adjust the ECU and, if needed, the kit's controller.

Does it damage the valves?

With adequate protection maps, no; on engines without hardened seats we use conservative criteria.

Does gas consumption rise?

It drops, by optimising mixture and advance for gas.

Contact

No-obligation quote for Gas vehicles (LPG, ECO-G, Bi-Fuel)

Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.

Request a quote

Data controller: ASF Motors SC (ASF Tech). Purpose: to answer your quote request. We do not share your data. You can exercise your rights as explained in the privacy policy.

Last updated: