Deletes and system solutions

DTC OFF: delete specific fault codes

After a modification, the ECU can flag codes for components that no longer exist or work out of range by design. DTC OFF deactivates those specific codes (and only those) keeping the rest of the diagnosis active. It is not clearing codes; it is telling the ECU what it should no longer monitor.

Instrument cluster with warning lights onDTC OFF: delete specific codes · Zaragoza

Important notice: only for vehicles that are not driven on public roads

This service disables or modifies a vehicle system and we offer it only for vehicles kept off public roads: closed circuits and motorsport, off-road use, machinery or export to countries where it is permitted. On a vehicle driven on public roads it is not permitted and may cause it to fail the roadworthiness inspection. The customer who requests it is solely responsible for this work and for how the vehicle is used, and declares awareness of the regulations that apply. More in legality, inspection and warranty and our terms of service.

Key facts

Category
File service
Format
File for workshops · in person in Zaragoza
Typical lead time
15–60 min during support hours
ECU access
OBD, bench or boot by ECU
Reversible
Yes, original kept
Support
Included · 8:00–22:00 every day
Price
Fixed quote in under an hour

01

When does deleting a fault code make sense?

It makes sense when the code is generated by a component deliberately removed or modified (sensor of a deleted system, actuator replaced by another type, competition catalyst), when the manufacturer offers no solution and the code leaves the car in degraded mode without a real fault; never to hide a mechanical fault.

We always ask the reason and the vehicle's use: we only work on competition, off-road, machinery or export vehicles. If the code is a real fault (a broken sensor on a standard car), we say so and recommend repair. Deleting a code "so the light goes off" on a car with a fault deceives the customer and ends in a bigger failure. Our rule: only codes resulting from a deliberate modification.

02

How is a DTC deactivated and what information is needed?

Each DTC has an entry in the ECU with its activation conditions and effect (light, degraded mode); DTC OFF modifies that entry so it is not evaluated or has no effect, and to do so we need the original file, the exact code list (with the manufacturer number if any) and a description of the modification causing them.

It is the service that accompanies almost every delete: AdBlue, DPF, EGR already include it. As a standalone service, it solves codes in custom projects.

Comparison

DTC OFF vs. clearing codes: what is the difference?

Quick answer: Clearing codes removes them from memory until the ECU detects the condition again, usually within minutes; DTC OFF changes the configuration so that specific condition is not evaluated, permanently and without affecting the rest.

CriterionDTC OFFClear codes
DurationPermanentUntil the next cycle
ScopeOnly the stated codesAll, temporarily
Rest of diagnosisIntactIntact
PurposeDeliberate modificationsAfter repairing the cause

If the cause can be repaired, repair and clear. If the cause is a modification, DTC OFF.

FAQ

Frequently asked questions

Can you delete any code?

Technically most; by policy, only those resulting from deliberate modifications, not real faults.

Do the other codes still work?

Yes, only the stated ones are deactivated.

Does it work for airbag or ABS codes?

For airbag and brakes we do not delete codes: they are safety.

Is it permanent?

Yes, as long as the original software is not rewritten.

Contact

No-obligation quote for DTC OFF: delete specific codes

Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.

Request a quote

Data controller: ASF Motors SC (ASF Tech). Purpose: to answer your quote request. We do not share your data. You can exercise your rights as explained in the privacy policy.

Last updated: