Services
File service for workshops across Spain and Europe
The core of ASF Tech. The workshop reads the ECU with its tool, sends us the original file and receives the modified file ready to write, with our engineers' support included. Performance, Eco, deletes, gearboxes and original software.
We work with any reading tool (KESS3, FLEX, AutoTuner, bFlash, CMD, Dimsport…) and with the OBD, bench and boot protocols of the main ECU manufacturers: Bosch EDC and MED, Continental/Siemens, Delphi, Denso, Marelli. Every file is reviewed by hand over the original maps and the checksum is verified before delivery.
Online support every day from 8:00 to 22:00 CET. If the car is on the lift on a Saturday, so are we.
- 01Stage 1More power and torque with standard hardware. The most requested file in the file service.→
- 02Stage 2File for cars with upgraded exhaust, intake or intercooler, tuned with log data.→
- 03Stage 3Bigger turbo, injectors, clutch: software built from scratch and tuned with the car's logs.→
- 04Engine ECU remappingGeneral ECU remapping: from back to stock to custom map-by-map adjustments.→
- 05Eco: fuel savingMore low-rev torque and less real consumption. The file for fleets, vans and trucks.→
- 06Torque delivery optimisationFlatter, more progressive torque curve: no jerks, no gaps, no wheelspin in first.→
- 07Throttle pedal calibrationMore direct or more progressive pedal response, by software and without inline boxes.→
- 08VMAX OFF: speed limiterSpeed limiter removal in the ECU for track and export use, or a fixed limit for fleets.→
- 09Pop & BangControlled exhaust explosions on lift-off, calibrated not to damage catalyst or valves.→
- 10Hardcut Limiter and diesel PopcornHard fuel cut at the limiter; on diesel, the "popcorn" effect.→
- 11Launch Control activationStanding start with fixed rpm and traction control, activated in the ECU and, on automatics, in the TCU.→
- 12FLAP OFF: exhaust valvesExhaust valve control: always open, by mode or by remote.→
- 13AdBlue OFFComplete deactivation of the SCR system and the no-start countdown, with no residual codes.→
- 14Particulate filter DPF / FAP OFFRemoval of DPF management: no regenerations, no warnings, with the differential sensor and temperature adapted.→
- 15EGR OFFClosing exhaust gas recirculation by software with adapted air maps.→
- 16GPF / OPF OFFPetrol particulate filter: removal of management and warnings on direct-injection engines.→
- 17Catalyst / O2 sensor OFF and Lambda OFFDeactivation of catalyst diagnosis and rear lambda sensors on decat exhausts.→
- 18MAF OFF: air-mass meterRunning without an air-mass meter using the pressure and temperature air model.→
- 19EVAP OFF and SAP OFFFuel vapour system and secondary air: diagnosis deactivation in competition builds and swaps.→
- 20Swirl Flaps OFF and TVA OFFIntake flaps and diesel throttle valve: software deletion after removal.→
- 21Start & Stop OFFPermanent Start & Stop deactivation in the ECU, for motorsport, machinery and export.→
- 22DTC OFF: delete specific codesDeactivation of specific fault codes after hardware modifications, without hiding the rest.→
- 23Immo OFF: immobiliserImmobiliser deactivation in replacement ECUs for competition, off-road vehicles and machinery, with proof of ownership.→
- 24Emissions monitoring (readiness)OBD monitors and readiness adjusted after a modification so diagnosis stays coherent.→
- 25TCU: automatic gearboxesAutomatic gearbox control unit remapping: shift speed, torque limits, shift points.→
- 26DSG TCU remappingDSG and S tronic gearboxes: millisecond shifts, torque limits, launch, true manual.→
- 27Original software (Back to Stock)Back to the factory file: from our history or from our original file database.→
- 28No-start solutionsVehicle that will not start due to electronics: ECU, immobiliser, corrupt software, modules.→
- 29Commercial and agricultural vehiclesTrucks, buses, construction and agricultural machinery: power, consumption, AdBlue/DPF diagnosis and ECU cloning.→
- 30Gas vehicles (LPG, ECO-G, Bi-Fuel)Software adaptation to LPG and CNG: mixture, advance, valve protection and gas-compatible Stage.→
FAQ
Frequently asked questions
What do I need to order a file?
A licensed reading tool for your vehicle's ECU, the original file read and the car details (make, model, engine, ECU, plate or VIN). We do the rest.
How long does a file take?
During support hours, most Stage 1, Eco and delete files are delivered in 15 to 60 minutes. Custom work may take longer and we tell you on receiving the original.
What if the car has problems after writing?
Support included: we review the file and the log data and adjust if needed. We can also return the original software.
Contact
No-obligation quote for file service
Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.
- HoursOnline support every day 8:00–22:00 CET · Office Monday to Friday 9:00–13:30 and 15:00–19:00, Saturday 9:00–13:00
- Emailinfo@asftech.es
Last updated: