FAQ
Frequently asked questions
Over a hundred real questions, answered in one or two sentences and grouped by topic. Each block links to the page where the answer is developed.
About ASF Tech →
What is ASF Tech and where is it?
ASF Tech is an ECU remapping and file service centre for workshops based at Carretera de Valencia, km 6,2, Nave 8, 50410 Cuarte de Huerva (Zaragoza, Spain). It works remotely with workshops across Spain and Europe and in person in Zaragoza.
How much does a remap or a file cost?
It depends on the vehicle, the ECU and the modification. Everything is quoted up front at a fixed price: send us make, model, engine and what you want and we reply during support hours. We do not publish rates because a Stage 1 on a TDI and one on a Porsche Turbo do not cost the same.
Do you work with private customers or only workshops?
Our main customer is the workshop. If you are a private customer and want your car remapped, we can do it at our workshop in Cuarte de Huerva or refer you to a customer workshop near you that writes our file.
Which remapping tools do you work with?
Any: Alientech KESS3 and KTAG, Magic Motorsport FLEX, AutoTuner, bFlash, Dimsport, CMD, Hexprog and the rest. You send us the file read with your tool and we return it in the format that tool writes.
How long does a file take?
During support hours, most Stage 1, Eco and deletes are delivered in 15 to 60 minutes. Custom work and Stage 2 or 3 with log data may take longer; we tell you on receiving the original.
What are the support hours?
Online support every day, weekends included, from 8:00 to 22:00 CET. The office and laboratory in Cuarte de Huerva open Monday to Friday 9:00–13:30 and 15:00–19:00, Saturday 9:00–13:00.
Can the car be returned to original software?
Yes. We keep each vehicle's original file and return it on request. We also offer Back to Stock recovery of units arriving with third-party software.
Does remapping affect the car's warranty?
A modification of the engine software can be detected by the manufacturer and affect the warranty on related components. We explain this to the workshop and the end customer before writing, and keep the original to restore it if needed.
Do you sell remapping tools?
Yes, we are authorised dealers of Alientech, Magic Motorsport, AutoTuner and CarLabImmo, and to order of Autel, Bosch, Launch, Topdon, Xtool, VCDS, Dimsport, bFlash, DFB, Hexprog, Autovei, Wabco, Xhorse, WinOLS, HaynesPro and Telwin. With advice, training and financing.
Do you do online coding?
Yes, remotely: coding of replaced ECUs, key and immobiliser programming, module adaptation, virginising and cloning, hidden feature activation and resolution of errors after a repair.
Do you remap motorcycles, trucks and machinery?
Yes. Motorcycles from the main brands, commercial vehicles, buses, agricultural and construction machinery and marine engines, by file or with a site visit depending on the case.
Are the reviews on this website real?
Yes. We only show reviews published on our Google Business listing, with a link to verify them. We do not publish invented testimonials.
File service →
What do I need to order a file?
A licensed reading tool for your vehicle's ECU, the original file read and the car details (make, model, engine, ECU, plate or VIN). We do the rest.
How long does a file take?
During support hours, most Stage 1, Eco and delete files are delivered in 15 to 60 minutes. Custom work may take longer and we tell you on receiving the original.
What if the car has problems after writing?
Support included: we review the file and the log data and adjust if needed. We can also return the original software.
How much does a Stage 1 file cost?
It depends on the ECU and engine. Fixed quote via WhatsApp with make, model, engine and ECU. Stage 1 →
Does Stage 1 damage the engine?
Not if the car is healthy and the file respects the engine's limits. It is the most conservative modification there is and what manufacturers themselves do when selling more powerful versions of the same engine. Stage 1 →
Can I do a Stage 2 with just an exhaust?
With downpipe and sports cat yes, with intermediate gains. Without touching the exhaust, a Stage 2 makes no sense. Stage 2 →
How long does it take?
The initial file, same day; full tuning, two or three log cycles. Stage 2 →
Do you do Stage 3 on any brand?
On those whose engine management we know in depth: VAG, BMW, Mercedes, Ford, PSA, Renault, Porsche and the main Japanese. Ask us about the project. Stage 3 →
Do I need a reinforced gearbox or clutch?
Almost always. Stage 3 torque exceeds what the standard clutch or gearbox will take. Stage 3 →
Can you change only the rev limiter?
Yes, one of the most requested adjustments, respecting the engine's mechanical limits. Engine ECU remapping →
Do you adapt the engine to LPG or E85?
Yes, with mixture and advance maps adjusted to the fuel and system fitted. Engine ECU remapping →
How much does it really save?
Between 5 and 12% on real routes, measured with the same driver and route. More on loaded and urban vehicles. Eco: fuel saving →
Do I lose power with Eco?
No; you gain low-rev torque. Peak power rises slightly or stays. Eco: fuel saving →
Can the "cap" in first and second be removed?
The per-gear limiter can be raised within what clutch and gearbox allow. We do it with judgement, not to the maximum. Torque delivery optimisation →
My Stage 1 from another workshop judders, can you fix it?
Yes, over their file or over the original we read. Torque delivery optimisation →
Is it the same as a Stage 1?
No. The pedal changes response, not power. They are usually combined. Throttle pedal calibration →
Does a direct pedal raise consumption?
It can, because it invites pressing more. The progressive one reduces it. Throttle pedal calibration →
Is removing the limiter legal?
It depends on each country's regulations and the vehicle's use. The owner is responsible for the vehicle's use. VMAX OFF: speed limiter →
What tyres do I need?
With a speed rating equal to or above the new maximum (W, Y, ZR as appropriate). VMAX OFF: speed limiter →
Does it break the engine?
Well calibrated, no. Badly calibrated, it damages catalyst and valves. That is why we limit intensity and temperature. Pop & Bang →
Does it work with the original catalyst?
The soft version yes. We do not recommend the aggressive one with the original catalyst. Pop & Bang →
Does it damage the engine?
With the cut rpm within the mechanical limit, no. Abusing the limiter wears any engine. Hardcut Limiter and diesel Popcorn →
Does it work with a DPF?
Yes, in soft version. Intense popcorn generates soot that saturates the filter. Hardcut Limiter and diesel Popcorn →
Does my car have hidden Launch Control?
Tell us model, engine and gearbox and we check. On VAG, BMW and Mercedes it is frequent. Launch Control activation →
Does the gearbox need touching?
On automatics and DSG yes; on manuals no. Launch Control activation →
Does it generate fault codes?
No; the valve stays connected and the ECU governs it with the new maps. FLAP OFF: exhaust valves →
Can I close them when I want?
Yes, by linking them to a driving mode or a remote. FLAP OFF: exhaust valves →
How much does AdBlue OFF cost?
It depends on the vehicle and ECU. Fixed quote with make, model, engine and software version. AdBlue OFF →
Are there warnings or codes left?
No. We remove the system DTCs and adjust the ECU so it does not generate them. AdBlue OFF →
Does the filter have to be removed?
Yes, or gutted. Software removes management; the physical plug must be removed. Particulate filter DPF / FAP OFF →
Are codes left?
No. We remove the DTCs and associated sensors with none pending. Particulate filter DPF / FAP OFF →
Does the EGR have to be removed?
Not necessarily; it stays closed by software. On heavily carboned engines, cleaning or blanking the duct is advisable. EGR OFF →
Are codes left?
No, we adapt the air maps so the ECU does not detect the missing EGR. EGR OFF →
Which cars have a GPF?
Almost all direct-injection petrols registered from 2018–2019. GPF / OPF OFF →
Does the filter have to be removed?
Yes, with the downpipe or by gutting. Software removes management, not the filter. GPF / OPF OFF →
Does removing the catalyst give more power?
On turbos, some, from less back-pressure; the real benefit comes with the full Stage 2. Catalyst / O2 sensor OFF and Lambda OFF →
Can I leave the rear sensor fitted?
Yes, it is ignored by software. It can also be removed. Catalyst / O2 sensor OFF and Lambda OFF →
Does the engine run the same without a MAF?
Well calibrated, yes; many ECUs already use the pressure model as backup. MAF OFF: air-mass meter →
Do I need a MAP sensor?
Yes, a reliable one. If the engine lacks one, it must be installed. MAF OFF: air-mass meter →
Does it affect performance?
No; they are emissions systems, not power systems. EVAP OFF and SAP OFF →
Can I do just one of the two?
Yes, whichever the project has removed. EVAP OFF and SAP OFF →
Do I lose power without flaps?
A little very-low-rev torque when cold; from 1,500 rpm it is unnoticeable. On many BMWs the ECU opens them early anyway. Swirl Flaps OFF and TVA OFF →
Are codes left?
No, we deactivate the actuator and its diagnosis. Swirl Flaps OFF and TVA OFF →
Does it affect the warranty?
Deactivation by coding is a configuration and rarely questioned; by file it can be detected. We explain beforehand. Start & Stop OFF →
Can I turn it back on?
Yes, at any time. Start & Stop OFF →
Can you delete any code?
Technically most; by policy, only those resulting from deliberate modifications, not real faults. DTC OFF: delete specific codes →
Do the other codes still work?
Yes, only the stated ones are deactivated. DTC OFF: delete specific codes →
What documentation do I need?
Registration document and owner's ID, or signed authorisation if the workshop acts on their behalf. Immo OFF: immobiliser →
Can I fit a breaker's ECU?
Yes: ideally we virginise and code it to the car. If not possible, Immo OFF. Immo OFF: immobiliser →
What is OBD readiness?
The state of emissions self-tests. An OBD reader shows it as "ready / not ready" per system. Emissions monitoring (readiness) →
Why does my DPF OFF car show "not ready"?
Because the file deactivated the system but not the monitor. It is corrected. Emissions monitoring (readiness) →
Is the gearbox necessary with a Stage 1?
Above 15–20% more torque, yes; below, advisable not to lose part of the gain. TCU: automatic gearboxes →
Does a faster shift wear the gearbox more?
No; a fast shift with adequate pressure reduces clutch slip time. What wears is a slow shift under high torque. TCU: automatic gearboxes →
Is raising the DQ200 torque limit safe?
With judgement and a healthy gearbox, up to a reasonable margin. We do not work miracles with a 250 Nm gearbox. DSG TCU remapping →
Is it done via OBD?
DQ250 and DQ381 on most versions; DQ200 and DL501 often on the bench. DSG TCU remapping →
Do you keep my original?
Yes, for every vehicle that passes through us, linked to its plate or VIN. Original software (Back to Stock) →
Can you get the original for a car you have not done?
In most cases, by the ECU's software and hardware number. Original software (Back to Stock) →
How do I rule out a mechanical cause?
ECU supply and earths, fuel pressure, compression, crank signal. If all is fine and the ECU does not respond or flags immobiliser, it is software. No-start solutions →
Can I ship you the ECU?
Yes, to Cuarte de Huerva. We recover it on bench or boot and return it. No-start solutions →
Do you remap trucks remotely?
Yes, by file with truck workshops across Spain. Commercial and agricultural vehicles →
Do you travel to the farm?
Within Zaragoza province and neighbours, yes. Elsewhere, with the machine's workshop. Commercial and agricultural vehicles →
Does it work on Dacia ECO-G?
Yes, the most common case: advance and mixture adjustment on gas and coherent Stage 1. Gas vehicles (LPG, ECO-G, Bi-Fuel) →
And on converted LPG?
Yes, with the kit identified; we adjust the ECU and, if needed, the kit's controller. Gas vehicles (LPG, ECO-G, Bi-Fuel) →
Online coding →
What do I need for online coding?
A computer with a stable internet connection, a compatible interface (J2534 or the workshop's tool) and the vehicle with a stabilised battery. We give you access to our remote session and do it together.
Do you cover all brands?
Most European and Asian manufacturers. Check your brand page or ask us about the specific case before ordering the part.
Which brands do you code online?
Most European and Asian: VAG, BMW, Mercedes, PSA/Stellantis, Renault, Ford, Fiat, Volvo, Toyota, Hyundai/Kia, Nissan, Honda, JLR. Ask about your case. Coding of replaced ECUs →
Can I fit a breaker's ECU?
Yes; we virginise it and code it to the car as if new. Coding of replaced ECUs →
Do you program keys for all brands?
For most. On recent BMW and Mercedes, some cases need bench work. Key and immobiliser programming →
Can I program a second-hand key?
Depends on the brand: some keys can be renewed and reprogrammed; others are single-use. Key and immobiliser programming →
Do you code injectors remotely?
Yes, IMA/IQA and equivalents on all common brands. Electronic module adaptation →
Do you do the DSG adaptation?
Yes, bite points and basic adaptation after repair or remap. Electronic module adaptation →
Can I buy any breaker's ECU?
No: hardware must match and a compatible software version. We give you the references before buying. Virginising and cloning of modules →
Do you clone clusters with the mileage?
Yes, respecting the vehicle's real mileage. Virginising and cloning of modules →
Is it reversible?
Yes, we save the original coding and restore it whenever you want. Hidden feature activation (coding) →
Does it affect the warranty?
It is a configuration, not an engine software change. Rarely questioned; we explain beforehand. Hidden feature activation (coding) →
What if you do not solve it?
We deliver a report with the diagnosis and next steps; the session is invoiced as agreed. Post-repair error resolution →
Do you work with my diagnostic tool?
If it has passthru or is J2534, yes. If not, with a compatible one we indicate. Post-repair error resolution →
Technical support →
Is support included with the file?
Yes. Every file includes reading, writing and post-check support. Hourly support is for jobs not tied to a file (recoveries, advanced diagnostics).
Can you recover a bricked ECU?
In most cases yes, via OBD, bench or boot depending on the model. If no recovery is possible, we tell you how to source and clone a unit.
Is support included with the file?
Yes, with all our files. Guided reading and writing →
What if I read for another supplier?
We help just the same, invoicing the time. Guided reading and writing →
Do you charge to interpret a code?
Quick queries from customer workshops are part of the relationship. Complex cases with a session, by time. Fault code (DTC) interpretation →
Do you interpret BMW hex codes?
Yes, and manufacturer codes from the main brands. Fault code (DTC) interpretation →
What do I do right after a failed write?
Do not disconnect the tool or the battery; do not retry blindly; call us. Bricked unit recovery (Back to Stock) →
Can you recover any ECU?
Most Bosch, Continental, Delphi, Denso and Marelli. Those with physical damage require electronic repair. Bricked unit recovery (Back to Stock) →
Do you work with my KESS3 Slave from another Master?
It would need relinking to ASF Tech; we explain how. Multi-tool support →
And with a Master of any brand?
Yes, with a plain file. Multi-tool support →
Which remote access software do you use?
A standard, secure one we indicate; the workshop authorises each session with a unique code. Advanced remote connection →
Can I see what you do?
Yes, in real time on your screen. Many workshops use it to learn. Advanced remote connection →
Motorcycles →
Which motorcycle brands do you remap?
BMW Motorrad, Ducati, KTM, Yamaha, Honda, Kawasaki, Suzuki, Triumph, Aprilia and Harley-Davidson, among others. Ask about your model.
Can the Quickshifter be activated by software?
On many models the hardware is standard and the function is activated in the ECU. We check with model and year.
How much does my bike gain?
Between 5 and 12% power with a standard exhaust and more with a free-flow one; above all, clean part-load response. Motorcycles: more power and torque →
Do I lose the warranty?
The software modification can be detected by the dealer. We keep the original to restore it. Motorcycles: more power and torque →
Do you remove the limiter on a 125?
Not for public-road use: it is the category homologation. Motorcycles: speed limiter and economy →
Do you do the A2 to full conversion?
Yes, by software, on bikes homologated for full power; we recommend regularising the paperwork. Motorcycles: speed limiter and economy →
Does it damage the bike's engine?
Well calibrated, no. The risk is catalyst and valves with aggressive maps; that is why we limit. Motorcycles: Pop & Bang and Crackle Map →
Does it work with the original exhaust?
Soft Crackle, yes. Motorcycles: Pop & Bang and Crackle Map →
Does my bike have hidden Launch Control?
Tell us model and year and we check. Motorcycles: Launch Control →
Does it wear the clutch?
If used often, yes. Moderate rpm and occasional use. Motorcycles: Launch Control →
Does my bike have the sensor as standard?
Tell us model and year and we check. Motorcycles: Quickshifter and Autoblipper →
Can I have Autoblipper with a cable throttle?
No; it requires ride-by-wire. Quickshifter yes. Motorcycles: Quickshifter and Autoblipper →
Tools and software →
Do you sell online with prices?
We work with fixed quotes: tell us your activity and we propose the tool, licences and financing. That way you avoid buying what you will not use.
What is the difference between Master and Slave?
The Master can edit files; the Slave reads and writes encrypted files sent by its Master (us). For most workshops, the Slave is the cost-effective option. We have a full guide.
How much does a KESS3 cost?
It depends on Master or Slave and licences. Fixed quote after learning your activity; with instalment financing. Alientech KESS3 and licences →
Can I start Slave and go Master?
Yes, by paying the difference. Alientech KESS3 and licences →
How much does a FLEX cost?
It depends on Master/Slave, modules and MAGBench. Fixed quote and financing. Magic Motorsport FLEX and MAGBench →
Is it compatible with my KESS3 files?
As Master, both work plain files. As Slave, each with its Master. Magic Motorsport FLEX and MAGBench →
Is there really no subscription?
Updates are included without a mandatory annual fee; there are coverage extension options. AutoTuner →
Does it do bench?
Yes, on the covered families. AutoTuner →
Do you sell individual emulators to workshops?
Yes, with advice to choose the right one. CarLabImmo emulators →
Do I need skills to fit them?
Some are plug & play; others require soldering and programming. We tell you and provide support. CarLabImmo emulators →
Why do you not publish prices?
Because tools are configured by licences and modules and the price depends on it. Fixed quote the same day. Brands to order: diagnostics, laboratory, keys, software →
Do you finance all tools?
Yes, through a partner finance company, subject to approval. Brands to order: diagnostics, laboratory, keys, software →
Can I go from Slave to Master?
Yes, by paying the tool and licence difference. Master or Slave guide →
And from Master to Slave?
It makes no economic sense; the Master can already do everything. Master or Slave guide →
Do you sell WinOLS?
Yes, to order, with modules and training. Professional software: WinOLS, technical data and deletes →
What are damos?
Files that identify maps in files of an ECU family; they speed up editing. Professional software: WinOLS, technical data and deletes →
Do you finance the self-employed?
Yes, with the finance company's usual documentation. Tool financing and payment methods →
Is there a deposit?
Depends on the operation; often not. Tool financing and payment methods →
Training →
Do I need prior experience?
For introductory and brand courses, no: mechanics and diagnostics knowledge is enough. For WinOLS and ECU repair we recommend the KESS3 course or equivalent experience first.
Do you issue a certificate?
Yes, an ASF Tech certificate of attendance with hours and content. On official manufacturer courses, the manufacturer's certificate.
How long does a brand course last?
One full day in person or two half-day online sessions. Remapping courses by brand →
Is there a certificate?
Yes, an ASF Tech certificate of attendance. Remapping courses by brand →
Do I need to own the tool?
No; it is provided on the course. If you have it, bring it. Alientech KESS3 / KTAG course →
Does it cover KTAG?
Yes, KTAG for bench and boot on older units. Alientech KESS3 / KTAG course →
Do I need prior experience?
Yes, reading ECUs. The KESS3 course or equivalent is the requirement. Professional WinOLS course: map editing →
Does it include WinOLS?
Use during the course yes; the licence is sold separately if you do not have it. Professional WinOLS course: map editing →
Do I need to know how to solder?
A base is advisable; SMD is practised during the course. ECU repair and cloning course →
Which tools do I need afterwards?
Soldering station, PSU, oscilloscope, FLEX or Hexprog, emulator. We advise as dealers. ECU repair and cloning course →
Is the certificate official?
It is a certificate of accredited training in vehicle high-voltage safety, valid to document staff qualification under prevention regulations. Hybrid and electric vehicle course (HVT) →
Is there practice with electric cars?
Yes, with real hybrids and EVs in the laboratory. Hybrid and electric vehicle course (HVT) →
How long is the chiptuning day?
A full day, 9:00 to 18:00, with lunch. In-person chiptuning and TSL training →
Do I have to buy a tool afterwards?
No. You decide with what you have seen. In-person chiptuning and TSL training →
Business and developers →
Is the API documented?
Yes, REST documentation with token authentication, file ordering, status and download. We give you access to a test environment after the first conversation.
How much does the white-label platform cost?
It depends on the number of workshops and volume. We prepare a proposal after understanding your network; we do not publish rates because each case is different.
Is the API REST with JSON?
Yes, with token authentication and OpenAPI documentation. API for workshop software →
Is there a test environment?
Yes, a sandbox with free test orders. API for workshop software →
Do workshops know ASF Tech is behind it?
As you prefer: full white label or declared partner. White-label file service platform →
How much does it cost?
Platform fee plus per active workshop fee, sized by volume; custom quote. White-label file service platform →
Legality, inspection and warranty →
Is Stage 1 legal?
It is a significant modification that must be legalised at ITV to drive with the modified power. Technically safe; administratively, the owner decides whether to legalise.
Does a Stage 1 car pass the ITV?
Yes, with standard hardware and a healthy engine: the ITV does not read software and emissions stay within limits.
And with DPF OFF?
No: opacity and visual inspection detect the missing filter.
Do I have to tell my insurer?
If power increases, yes. Some companies accept it with a surcharge.
Do I lose the warranty?
That of components related to the modification may be refused if the manufacturer detects non-original software.
What warranty does ASF Tech give?
Free correction of any file error for the life of the vehicle, and return to original always available.
Prices and quotes →
How much does a Stage 1 cost?
It depends on the ECU, the reading method and whether by file or in person. Fixed quote in under an hour with make, model, engine and ECU.
Is there a workshop rate?
Yes, a professional per-file rate with volume discount and bonus prepaid balance.
Is support charged separately?
Not with our files: it is included. Support sessions without a file are invoiced by time.
Do you charge to return to original?
Not if the car came through us.
Do I have to pay in advance?
Private customers: on delivery. Workshops: prepaid balance or monthly invoicing. Tools: per financing.
Contact
Your question not here?
Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.
- HoursOnline support every day 8:00–22:00 CET · Office Monday to Friday 9:00–13:30 and 15:00–19:00, Saturday 9:00–13:00
- Emailinfo@asftech.es
Last updated: