Engineer technical support

Bricked unit recovery (Back to Stock)

The write was cut, the file was for another version or the battery dropped mid-update, and the ECU does not communicate. Before buying another, we recover it: via OBD if it responds in recovery mode, on the bench or boot if not. Remotely with your tool or by shipping to Zaragoza.

Chips and components on an electronic boardBricked unit recovery (Back to Stock) · Zaragoza

Key facts

Format
WhatsApp, phone or remote connection
Typical lead time
Immediate during support hours
ECU access
Any tool
Support
Included · 8:00–22:00 every day
Price
Fixed quote in under an hour

01

Can an ECU that does not communicate be recovered?

In the vast majority of cases yes: an ECU that does not respond via OBD after a failed write usually keeps the bootloader and allows recovery through the tool's recovery mode via OBD, or directly on the bench; if the bootloader is also damaged, boot mode accesses the microprocessor and allows rewriting everything; only units with hardware damage (short circuit, burnt component) cannot be recovered by software.

The first thing we tell the workshop is: do not disconnect anything and do not keep trying to write. With the tool in recovery mode and our guidance, many units come back in a remote session. If not, bench or boot with the workshop's tool or in our laboratory. What is almost never needed is buying a new ECU.

02

What do we need and how long does it take?

We need to know what happened (tool, file, moment of the cut), the ECU identification (label) and, if it exists, the original file or previous read; remote recovery takes one to three hours; bench or boot at the workshop, a guided session; shipped to the laboratory, two to four days with transport.

If the file was ours, the original is saved and recovery is immediate. If it was another supplier's, we locate the original by version. See original software and guided reading and writing so it does not happen again.

Comparison

Recover the ECU vs. buy a new one: which is right?

Quick answer: Software recovery costs a fraction of a new ECU, preserves adaptations and immobiliser and is done in hours or days; a new ECU demands full coding, days of waiting and a high cost.

CriterionRecoverNew ECU
CostSession or laboratoryPart + coding
Lead timeHours to 4 daysDays to weeks
Immobiliser and adaptationsPreservedTo be coded
When notHardware damageAlways possible

Recover first. In 90% of cases nothing more is needed.

FAQ

Frequently asked questions

What do I do right after a failed write?

Do not disconnect the tool or the battery; do not retry blindly; call us.

Can you recover any ECU?

Most Bosch, Continental, Delphi, Denso and Marelli. Those with physical damage require electronic repair.

Can I ship you the ECU?

Yes, to Cuarte de Huerva; we return it in 2–4 days.

What if the file was from another supplier?

We locate the original by software version and restore.

Contact

No-obligation quote for Bricked unit recovery (Back to Stock)

Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.

Request a quote

Data controller: ASF Motors SC (ASF Tech). Purpose: to answer your quote request. We do not share your data. You can exercise your rights as explained in the privacy policy.

Last updated: