Motorcycles
Motorcycles: Quickshifter and Autoblipper
On many bikes the shift sensor comes as standard and the function is deactivated by version; on others the sensor is fitted and the function must be activated in the ECU. We activate quickshifter (clutchless upshift) and autoblipper (clutchless downshift) and adjust cut and blip timings for each bike.
Motorcycles: Quickshifter and Autoblipper · ZaragozaKey facts
- Category
- Motorcycles
- Format
- In person in Zaragoza · file for bike workshops
- Typical lead time
- Half a day in person · 15–60 min per file
- ECU access
- Diagnostics or bench
- Reversible
- Yes, original kept
- Support
- Included · 8:00–22:00 every day
- Price
- Fixed quote in under an hour
01
Which bikes have the Quickshifter in the software without activation?
Many mid- and high-range bikes from 2016 onwards carry the sensor as standard or pre-wiring and the function in the software, deactivated by version or trim: Yamaha MT-09 and Tracer, Kawasaki Z900 and Ninja, Triumph Street Triple, KTM Duke 790/890, BMW F900 and S1000, Ducati Monster and Multistrada, Honda CB1000R and Africa Twin; on others the manufacturer or compatible sensor is fitted and activated.
We check with model and year what your bike has: sometimes it is a parameter; sometimes the sensor must be fitted. The Autoblipper requires electronic throttle; on cable-throttle bikes, Quickshifter only.
02
How are cut and blip timings adjusted?
The cut time on upshift (duration of the ignition or injection cut) and the blip on downshift (amount and duration of the throttle blip) are adjusted per gear and rpm so the shift goes in smoothly without knocks or jerks; calibration is refined with the bike moving and, if needed, over several iterations.
A badly calibrated quickshifter knocks and wears the gearbox; a well-calibrated one is invisible. We calibrate it with the bike in Zaragoza or with the motorcycle workshop by file. See also Launch Control and power.
Comparison
Quickshifter activated in the ECU vs. external module: which is right?
Quick answer: Activating the function in the ECU uses the manufacturer's logic, with cut by gear and rpm and no extra parts; the external module intercepts injection with a fixed time and gives worse shifts.
| Criterion | ECU (ASF Tech) | External module |
|---|---|---|
| Cut by gear and rpm | Yes | Fixed time |
| Autoblipper | Yes (ride-by-wire) | No |
| Parts | Only the sensor | Module + sensor + wiring |
| Shift quality | High | Variable |
If the ECU supports it, always in the ECU. The external module is for older bikes.
FAQ
Frequently asked questions
Does my bike have the sensor as standard?
Tell us model and year and we check.
Can I have Autoblipper with a cable throttle?
No; it requires ride-by-wire. Quickshifter yes.
Does it wear the gearbox?
Well calibrated, no. It is the same system higher versions carry as standard.
Do you do it by file?
Yes, with the motorcycle workshop to fit the sensor and calibrate.
Related services
Contact
No-obligation quote for Motorcycles: Quickshifter and Autoblipper
Tell us the vehicle, engine, ECU and what you want to achieve. We reply during support hours with a fixed price and lead time.
- HoursOnline support every day 8:00–22:00 CET · Office Monday to Friday 9:00–13:30 and 15:00–19:00, Saturday 9:00–13:00
- Emailinfo@asftech.es
Last updated: